Browse by Tags

How to configure static routes to other end of VPN tunnel

We have 4 locations that are linked with Linksys RV042 routers using VPN tunnels between locations. These work OK but we are having trouble routing to certain subnets. The layout is: Branch 1: Cisco router (10.61.124.1) to data services provider (10.46.0.0 and 10.46.240.0 traffic), Linksys RV042 router...

Posted to VPN (Forum) by hardware on 02-22-2010
Connect to multiple VPN's

Hi, Let me start off by explaining that our router peers (or something similar) with several sites already (via VPN), each site has a different IP range, for example 192.168.x.34, where 'x' would signify which site this is. Now for certain other sites, I have to VPN into them. Now obviously once...

Posted to VPN (Forum) by hardware on 02-20-2010
Outlook can't connect to Exchange thru VPN when endpoints are the same subnet

Our home office exchange server is on a 192.168.1.x subnet. When traveling we establish a Microsoft VPN and usually are able to connect to exchange when the remote location gives us an ip address on a different subnet like 10.10.10.x. However when we try from a location which gives us an ip address on...

Posted to VPN (Forum) by hardware on 02-20-2010
Setting up a VPN tunnel between 2 BEFVP41 v1.0

I'm trying to set up a VPN tunnel between 2 BEFVP41, version 1, firmware v1.41.0. Both have been successfully individually tested as gateway/routers (w/o VPN). For VPN testing purposes, the routers are now connected with a X-over cable (WAN port). To each one is attached one computer running XP Pro...

Posted to VPN (Forum) by hardware on 02-20-2010
IPSEC Tunnel Between SonicWALL TZ170 (Enhanced) and Draytek 2820

I am busy trying to setup a IPSEC tunnel between a TZ170 with enhanced OS and a Draytek 2820. I have input the settings on both ends and the tunnel passes phase 1 but then fails on phase two. I have tried all combinations and I am getting nowhere. Below are the errors that are being logged in the SonicWALL...

Posted to VPN (Forum) by hardware on 02-20-2010
Browsing - Site-to-site VPN

I'm currently deploying a new network for a client. There are two sites, two DCs, and there will be a site-to-site VPN link between the two sites. I will be using the Windows Server 2008 RRAS for the VPN endpoint in HQ, and the router in the branch office for the other end of the VPN. My question...

Posted to VPN (Forum) by hardware on 02-20-2010
VPN: Local LANS cannot pass traffic to one another.

So I've recent gotten the tunnel up, but the Local LANS cannot ping each other or see anything on the other side. I've had great results with the experts on this site and will again ask for asistance. Here are the configs as they sit right now. Once this is taken care of, I will be implementing...

Posted to VPN (Forum) by hardware on 02-20-2010
Best way of easily sharing Exchange and Directory access from a server to home workers

My client has a 2003 Small Business Server and just uses it as a file server at the moment. I have been asked what solution I could put in place reasonably cheaply to reliably enable home workers to view and edit documents on the server and access their emails via Outlook using Exchange. I would really...

Posted to Remote Access (Forum) by hardware on 02-20-2010
Linksys, WRV54G router firewall, WRV54G, setting up vpn issues

hey all , Im having quite some time setting up some vpn tunnels .. using WRV54G's here is the deal .. i have 3 Linksys WRV54G's in 3 locations (ny ,fl and lv) now .. i did some reading here and saw a basic config that "should" work .. .but didnt... i'll type details and hopefully...

Posted to VPN (Forum) by hardware on 01-24-2010
Setup vpn between Sonicwall TZ 180/210 and Watchguard Firebox X10E?

Has anyone ever setup a vpn between a Sonicwall TZ 180/210 and a Watchguard Firebox X10E? I am trying to network 2 stores together and each one has a different firewall as listed above.

Posted to VPN (Forum) by hardware on 01-24-2010

Page 1 of 156 (1559 items) 1 2 3 4 5 Next > ... Last »